- How far off the ground should a fence be?
- How deep should a 4 foot fence post be?
- Is 1 ft deep enough for fence post?
- How do you keep fence posts from rotting in concrete?
- How deep should a 10 foot fence post be?
- What size should a fence post be?
- What is the maximum distance between fence posts?
- How big of a hole do I need for a 6×6 post?
- Will wooden posts rot in concrete?
- How many bags of concrete do I need for a 4×4 post?
- Is 2 feet deep enough for fence posts?
- Should I use 4×4 or 6×6 fence posts?
- What is the cheapest fence to build?
- Do you have to use concrete for fence posts?
- How deep should a 6×6 post be in the ground?
- How long will a treated 4×4 post last in the ground?
How far off the ground should a fence be?
two inchesIn most applications, a wood fence should be installed at least two inches off the ground.
Your posts and rot boards (if you choose to install them) should be the only fence components that contact the ground..
How deep should a 4 foot fence post be?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
Is 1 ft deep enough for fence post?
You should always bury one-third of your fence post underground. … This means that unless you are building a 2-foot fence, which is unlikely in any garden, a 1-foot hole will not be deep enough to support your post. For main and gateposts, you should dig the holes an additional 6 inches deep.
How do you keep fence posts from rotting in concrete?
Tamp down the gravel. You can use concrete, if desired, but the moisture in the concrete can sometimes cause wooden posts to rot more quickly, while the gravel allows water to drain quickly away from the fence post and into the soil.
How deep should a 10 foot fence post be?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.
What size should a fence post be?
The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post. The hole will need to be about 3 times the width of your post.
What is the maximum distance between fence posts?
8 to 12 feetMost fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
How big of a hole do I need for a 6×6 post?
10″A 6×6 post requires a 10″-diameter hole. Shovel a 6″ layer of gravel into the hole to provide drainage.
Will wooden posts rot in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.
How many bags of concrete do I need for a 4×4 post?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.
Is 2 feet deep enough for fence posts?
The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.
Should I use 4×4 or 6×6 fence posts?
Instead of 4×4 posts, go with 6×6 posts. The extra size makes a huge difference. It’s a smart place to invest a little extra in your fence, because if your posts distort after they have been set in the ground with concrete, they are extremely difficult to replace.
What is the cheapest fence to build?
The Most Affordable Ways to Fence in a YardTreated pine ($12 to $19 per linear foot installed) 2/17. … Chain link ($10 to $20 per linear foot) 3/17. … Wrought iron ($24 to $32 per linear foot) 4/17. … Barbed wire ($1.50 to $2 per linear foot) … Hog wire ($3 to $5 per linear foot) … Electric ($1 to $6 per linear foot) … Pallet (free!) … Split rail ($10 to $20 per linear foot)More items…
Do you have to use concrete for fence posts?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.
How deep should a 6×6 post be in the ground?
The depth of your hole should be about 1/4 of the height of your post. For a 6×6 post, the diameter of the holes should be about 12 inches square. As a rule the width of your post hole should never be less than 10 inches.
How long will a treated 4×4 post last in the ground?
The Forest Products Laboratory and other research groups have shown that treated wood stakes placed in the ground for more than 40 years remain rot-free. But young pressure-treated decks, many less than 10 years old, are being shoveled into landfills.